How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer

Hello, today I would like to show you How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer which can be done remotely online. Vivo Y30 Demo Live is a limited-feature tool that is commonly used for advertising on mobile displays. For the specifics is no different from Vivo Y30, only the price is a bit cheaper.

How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer

Vivo Y30 was launched on 9 May 2020. The Smartphone comes with a 6.47-inch touch screen with a resolution of 720x1560 pixels and an aspect ratio of 19.5:9. Vivo Y30 is powered by an octa-core MediaTek Helio P35 (MT6765) processor with 8GB of RAM. How to remove Live Vivo Y30 Demo without MRT Key Dongle via Remote Teamviewer-Vivo Y30 uses the Android 10 operating system and is powered by a 5000mAh non-removable battery.

On the side of the camera, Vivo Y30 on the back wears a 13-megapixel main camera with an aperture of f/2.2; Secondary camera with an 8-megapixel resolution with an aperture of f/2.2; How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer - A two-megapixel resolution camera with an aperture of f/2.4 and a fourth camera that is only 2 megapixels with an aperture of f/2.4. The rear camera settings have autofocus. Then on the front attached an 8-megapixel camera for selfie.

Vivo Y30 runs using a Funtouch OS based on Android 10 and packs 128GB of internal storage. Vivo Y30 is a dual-SIM smartphone (GSM and GSM) that accepts Nano-SIM and Nano-SIM cards. Vivo Y30 measures 162.04 x 76.46 x 9, 11mm (height x width x depth) and weighs 197.00 grams. It was launched in the colors of Dazzle Blue and Moonlight White.

The connectivity options on Vivo Y30 include Wi-Fi 802.11 b/g/N, GPS, Bluetooth v 5.00, USB OTG, FM Radio, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include accelerometer, ambient light sensor, proximity sensor, and fingerprint sensor. Vivo Y30 supports face unlock.


How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer

If you have a Vivo Y30 live Demo device with limited features, we can help you to remove the live demo so that its features can be fully used. Please download the required file at the following link:


The Steps Remove Demo Live Vivo Y30 

First, Download and Install Teamviewer 15. If you don't understand please see How to Install Teamviewer 15 easily.

Send ID and Password Teamviewer to us. We will do configure your computer so that the MRT Tool can run even if you do not have a dongle.
    If MRTkey is already running properly, please select the Tab  "VIVO". In the section  "Mobile Options" Select the model namely X9S. In the port, keep Auto only.
      Then in the section  "Operation Options" select  "Remove Vivo Demo".
        Check on your device, go to Settings turn on Developer Options and then Enable USB Debug and Enable OEM key
          Next Dial *#558 #. Select "Quality Verification Test" Click on the Tab  "Development" Checklist under "Debugging Port". 
            Connect the device to your computer using a USB cable. Vivo devices will be detected on your computer.
              Next just click  "START". Then the tool will work and just let it go until the process is done marked with the appearance of the text  "All is Done".

              How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer

              If the process is complete, the phone will reboot itself. Please wait a few moments.

              How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer

              How, very easy? if there find any difficulties please contact us or leave a comment below. Such is our discussion on How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer. Hopefully, it can be useful for all of you.

              0 Response to "How to Remove Demo Live Vivo Y30 Without Dongle via Teamviewer"

              Post a Comment