Realme 5 RMX1911 eMMC Dump File Firmware Tested

Realme 5 RMX1911 eMMC Dump File Firmware Tested on this page can be used to direct ISP or repair eMMC. EMMC damage is usually characterized as bootloop, restart, vibrate only, appears the message  "Unfortunately application has stopped ", Failed Flash appears "BROM ERROR" or total dead boot.

Realme 5 RMX1911 eMMC Dump File Firmware Tested


Realme 5 RMX1911 eMMC Dump File Firmware Tested

This Realme 5 RMX1911 Dump File Firmware was backup from a normal smartphone which you can use this for repairing emmc or direct ISP. It has been tested for use in repairing an EMMC IC on the Realme 5 RMX1911 device and succeeded without any problems. Please download at the following link:


File Name: RMX1911(RMX1911EX_11_A.15-9-PKQ1.190616.001)[DP68MB_AFB6C268] (64GB)
File Size: 1GB
Servers: Google Drive, AndroidFileHost
Whatsapp+6282283569887
Link: Fast Download($2) | Slow Download($2)
Note: Write eMMC Dump File with UFI Box or Easy JTAG Plus.

File Name: RMX1911(RMX1911EX_11_A.29-9-PKQ1.190616.001)[DD68MB_1377A85B] (32GB)
File Size: 1GB
Servers: Google Drive, AndroidFileHost
Whatsapp+6282283569887
LinkFast Download($2) | Slow Download($2)
Note: Write eMMC Dump File with UFI Box or Easy JTAG Plus.

File Name: RMX1911(RMX1911EX_11_A.25-9-PKQ1.190616.001)[S0J9K9_11FF6D49] (128GB)
File Size: 3GB
Servers: Google Drive, AndroidFileHost
Whatsapp+6282283569887
LinkFast Download($2) | Slow Download($2)
Note: Write eMMC Dump File with UFI Box or Easy JTAG Plus.

How to Write Realme 5 RMX1911 eMMC Dump File Firmware Tested

If Realme 5 RMX1911 eMMC suffered a problem then the repair is by using the box flasher. Usually, a box flasher used to are UFI box or Easy JTAG Plus. There are two ways to repair it with Direct ISP or make new eMMC replacement. 

Write Realme 5 RMX1911 eMMC Dump File by UFI Box
Step 1: Run UFI-EMMC Toolbox
Step 2: Click Identify
Step 3: Select rom 1, rom 2, rom 3, and,extcsd then insert file.
Step 4: Click the Write button. Then Wait processing is complete.

Write Realme 5 RMX1911 eMMC Dump File By Easy Jtag Plus
Step 1: Run Easy Jtag Plus
Step 2: Click Check EMMC/UFS
Step 3: Select rom 1, rom 2, rom 3, and, extcsd then insert file.
Step 4: Click Write all ROMs button. 
Step 5:  Then Wait until the Realme 5 RMX1911 eMMC Dump File Firmware has been written completely.

0 Response to "Realme 5 RMX1911 eMMC Dump File Firmware Tested"

Post a Comment