How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer

Hello, today I would like to show you How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer which can be done remotely online. Vivo Y50 Demo Live is a limited-feature tool that is commonly used for advertising on mobile displays. For the specifics is no different from Vivo Y50, only the price is a bit cheaper.

How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer


Vivo Y50 was first launched in 2020. The device comes with a Snapdragon 665 chipset and an Adreno 610 GPU. On this device pinned internal storage with 128GB capacity and 8GB RAM and battery 5000 mah.

On the side of the screen vivo Y50 embedded IPS LCD capacitive touchscreen, 16M colors sized 6.53 "inch with a resolution of 1080 × 2400 pixels. On the Korea side, Vivo Y50 equipped with 4 camera sensors Berolusi 13 MP aperture F/2.2 (wide) PDAF, 8 MP, F/2.2, 13mm (ultrawide), 1/4.0 ", 1.12 μm. 2 MP, F/2.4, (macro) 2 MP, F/2.4, (depth). The front camera is equipped with a 16 MP sensor, F/2.0, (wide) that can be used for selfies. The camera is equipped with a feature to record videos with a maximum resolution of [email protected] Vivo Y50 uses Functouch 10 which runs above the Android 10 operating system.

For the connectivity sector, the device uses GSM/HSPA/LTE technology to perform data communication with the maximum speed of HSPA 42.2/5.76 Mbps, LTE-A. In addition, there are also Wi-Fi connectivity 802.11 a/b/g/n, dual-band, Wi-Fi Direct, hotspot, Bluetooth (5.0, A2DP, LE), GPS (Yes, with A-GPS, GLONARAB, GALILEO) and USB 2.0, Type-C 1.0 reversible Connector, USB On-The-Go.


How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer

If you have a Vivo Y50 live Demo device with limited features, we can help you to remove the live demo so that its features can be fully used. Please download the required file at the following link:


The Steps Remove Demo Live Vivo Y50 

First, Download and Install Teamviewer 15. If you don't understand please see How to Install Teamviewer 15 easily.

Send ID and Password Teamviewer to us. We will do configure your computer so that the MRT Tool can run even if you do not have a dongle.
    If MRTkey is already running properly, please select the Tab  "VIVO". In the section  "Mobile Options" Select the model namely X9S. In the port, keep Auto only.
      Then in the section  "Operation Options" select  "Remove Vivo Demo".
        Check on your device, go to Settings turn on Developer Options and then Enable USB Debug and Enable OEM key
          Next Dial *#558 #. Select "Quality Verification Test" Click on the Tab  "Development" Checklist under "Debugging Port". 
            Connect the device to your computer using a USB cable. Vivo devices will be detected on your computer.
              Next just click  "START". Then the tool will work and just let it go until the process is done marked with the appearance of the text  "All is Done".

              How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer

              If the process is complete, the phone will reboot itself. Please wait a few moments.

              How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer

              How, very easy? if there find any difficulties please contact us or leave a comment below. Such is our discussion on How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer. Hopefully, it can be useful for all of you.

              0 Response to "How to Remove Demo Live Vivo Y50 Without Dongle via Teamviewer"

              Post a Comment