Skip to content Skip to sidebar Skip to footer

Vivo Y51 PD1510F Firmware Download

Vivo Y51 PD1510F Firmware Download

Vivo Y51 PD1510F Firmware Download - The Vivo mobile phone is expensive Y51 with average features. Features a hybrid SIM become a drawback for people who want to get a cell phone with a separate memory card slot. At this range, there are many other options like Coolpad note 3, Lenovo K3 Note etc. which seems to be a much better choice than this.

The Vivo LCD IPS display shows the Y51 5-inch screen with a resolution of 960 x 540 pixels pixel density that leads to 220ppi. To drive the process, there is a quad-core processor A53 1.2 GHz Cortex sitting on Qualcomm's Snapdragon chipset 410 MSM8916. Add 2 GB of RAM is the core and the graphics card Adreno 306 for efficient processing and display. It runs on Android v 5.0.2 (Lollipop) operating systems and supporting Nano and Hybrid SIM.

Vivo Y51 has 8MP snapper raise including alternatives, for example, auto-center, CMOS picture sensor, computerized picture adjustment, advanced zoom, LED Flash, auto, Continuous Shooting, pay, confront recognition, geo-labeling, mode High Dynamic Range (HDR)), ISO Control, view, self-clock, tap to center and White adjust presets. For admirers of a selfie, there is a 5MP camera on the front that catches photographs of good quality.

 It houses 16 GB internal memory expandable up to 128 GB using a microSD card.

Vivo Y51 activated by battery Li-Polymer 2, 350mAh guaranteed could influence a discussion to time up to 12 hours and can last up to 330 hours in reserve mode. It has a scope of network alternatives, for example, GPRS, EDGE, 3 g, 4 g, Wi-Fi, 802.11 b/g/n, Bluetooth, Mobile Hotspot v4.0, A2DP, GPS with A-GPS and a USB port.

Vivo Y51 PD1510F Firmware Download

This is the official page, from which you can download Vivo Y51 PD1510F Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.

Type: ROM Size: 2GB
md5: 8e840a4a7c5ab9077646f054aae7b7ab


  • Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
  • Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online

How to Flash Vivo Y51 PD1510F Firmware 

  1. Install the USB driver and Qfil tools.
  2. Turn off your cell phone.
  3. Now connect your phone to the PC using the USB cable while holding the Volume button Up.
  4. Next, run the  "QFIL ". 
  5. After the QFIL is open make sure your mobile phone has detected the PC without writing  "Qualcomm HS USB-9008 QDLoader " in tools QFIL, if there is already such writings now click Browse and find the file  "prog_emmc_firehose_8916 mbn. " that is in the folder extract results the firmware, then click Open. 
  6. Now click "Load XML  " and will appear " rawprogram_unsparse " click Open in the file then it will show up again the file  "patch0. xml " click open again. 
  7. Now click  "Download " on QFIL and the process of flashing will wait until it is finished running.
  8. If the flashing process is completed, the mobile phone will boot automatically 

"Thanks a lot for visiting on our Blog. Let me know if the link is broken or Vivo Y51 PD1510F Firmware Download is not working very well"