Skip to content Skip to sidebar Skip to footer

Vivo V9 6GB PD1730CF Firmware Download

Vivo V9 6GB PD1730CF Firmware Download

Vivo V9 6GB PD1730CF Firmware Download - Vivo V9 is clearly a viewer with the screen bezel slimmer with a notch in the top of the blending. Very thin and easily held. Processor efficient mid-range and large RAM will mean daily activities and mid-range game will work perfectly, and switch between applications should not be a problem as well. Both front and rear cameras take good pictures with portrait mode. Although for the price with micro-USB, not USB type-C is a downer, the battery could be larger to compliment such a big screen.

Vivo V9 flaunting Full HD LCD screen + 6.3 inches size IPS with 400 PPI pixel density and a sharp screen resolution of 1080 x 2280 pixels. It has an impressive 19:9 aspect ratio and the ratio of screen-to-body 84.91%. At the Department, the camera has a 2MP camera + 13MP rear double with autofocus, f 2.2 aperture and LED flash. Another important feature is the HDR, face detection, touch focus and more. The front gunner is the camera 12MP with aperture f 2.0. Vivo V9 6GB PD1730CF Firmware Download

This phone offers 64-bit octa-core Snapdragon SoC MSM8956 660. In the Department of graphics, it is supported by Adreno 512. It has the fingerprint sensor on the back. It holds 6 GB of RAM. In the phone battery pack 3, 260mAh Li-ion battery which can not be removed, that will last about a day with regular use.

Vivo V9 6GB PD1730CF Firmware Download. This is a dual sim mobile phone with nano-specific slot and supports a wide spectrum of 4 g includes a VoLTE so most of the network will work. It has a 802.11 b/g/n/n 5 GHz WIFI with Bluetooth v 4.2. In the location, it supports A-GPS and Glonass. The USB port is micro-USB 2.0 with OTG support and mass storage. It has 64 GB of internal storage with up to 256 GB upgrade with a dedicated SD slot.


Vivo V9 6GB PD1730CF Firmware Download

This is the official page, from which you can download Vivo V9 6GB PD1730CF Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.


Vivo V9 6GB PD1730CF Fastboot Firmware 

File Name: PD1730CF_EX_A_1.2.9_vivo_qcom_LA.UM.6.2.r1-sdm660.rar
File Size: 2 GB
Link: Download

File Name: PD1730CF_EX_A_1.2.9_vivo_qcom_LA.UM.6.2.r1-sdm660.rar
File Size: 2 GB
Link: Download


Vivo V9 6GB PD1730CF QFIL Firmware 

File Name: PD1730CF_EX_A_1.2.9_vivo_qcom_LA.UM.6.2.r1-sdm660_split.rar
File Size: 2 GB
Link: Download

File Name: PD1730CF_EX_A_1.2.9_vivo_qcom_LA.UM.6.2.r1-sdm660_split.rar
File Size: 2 GB
Link: Download




Readme:

  • Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
  • Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online

How to Flash Vivo V9 6GB PD1730CF Firmware Download

  1. Install the USB driver and Qfil tools.
  2. Turn off your cell phone.
  3. Now connect your phone to the PC using the USB cable while holding the Volume button Up.
  4. Next, run the  "QFIL ". 
  5. After the QFIL is open make sure your mobile phone has detected the PC without writing  "Qualcomm HS USB-9008 QDLoader " in tools QFIL, if there is already such writings now click Browse and find the file  "prog_emmc_firehose_8916 mbn. " that is in the folder extract results the firmware, then click Open. 
  6. Now click "Load XML  " and will appear " rawprogram_unsparse " click Open in the file then it will show up again the file  "patch0. xml " click open again. 
  7. Now click  "Download " on QFIL and the process of flashing will wait until it is finished running.
  8. If the flashing process is completed, the mobile phone will boot automatically 

"Thanks a lot for visiting on our Blog. Let me know if the link is broken or Vivo V9 6GB PD1730CF Firmware Download is not working very well"