Huawei Y625-U32 Firmware Download

Huawei Y625-U32 Firmware Download

Huawei Y625-U32 Firmware Download - Smartphone Huawei Y625 launched in July 2015. This phone comes with a touchscreen display size 5.00 inches with a resolution of 480 pixels with 854 pixels.

Huawei Y625 powered by quad-core processor 1.2 GHz and comes with 1 GB RAM. These phones Pack the 4 GB of internal storage that can be expanded up to 32 GB via microSD card. As far as concerns the camera, inviting the main camera Y625 Huawei 8 megapixel camera on the back and the front 2 megapixel shooter for the narcissist.

Huawei's Android-run 4.4 Y625 and bolstered by the non-removable battery 2000mAh. Measure x 9.60 x 72.60 142.00 (stature x width x thickness) and weighs 160.00 grams.


Huawei Y625 is smartphone SIM (GSM) that receive Regular single-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth and 3 g. The sensor on the phone incorporates Compass/ Magnetometer, closeness sensor and Ambient light sensor.


Huawei Y625-U32 Firmware Download

This is the official page, from which you can download Huawei Y625-U32 Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.


Huawei-Y625-U32_V100R001C479B106.tar.gz
type: ROM size: 722.8MB
md5: c358c2584cc633ce8df82c94285d0014
Download


Readme:

  • Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
  • Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online

How to Flash Huawei Y625-U32


  1. Download Qcomdloader exe
  2. Download Qualcomm USB Drivers Run the QcomDloader Located in the Folder Then Extract Results In Gears 1 click and enter the Firmware that you have downloaded and are located in the Folder Next Extract Results In Gears 2 and Click Set Main Page QcomDloader on Download select Upgrade Mode
  3. On Download Settings Select Checkbox Validate Downloaded ROMS
  4. Next click Play on QcomDloader Then Install Process will automatically take place and wait until the process is complete, if Completed it will pop up a notification (Removed just Passed) at QcomDloader.
  5. Process Flashing Finished Unplug Your Cell Phone Then Try To Turn It On, For Early Boot After Flashing Is Usually Rather Long So You Just Be Patient Until The Boot Process Completes.



"Thanks a lot for visiting on our Blog. Let me know if the link is broken or Huawei Y625-U32 Firmware Download is not working very well"

Subscribe to receive free email updates: