Huawei Y320-U30 Firmware Download

Huawei Y320-U30 Firmware Download

Huawei Y320-U30 Firmware Download - Huawei Ascend Y320 smartphone launched in January 2014. This phone comes with a 4.00-inch touchscreen display with a resolution of 480 pixels to 800 pixels.

Huawei Ascend Y320 powered by a dual-core processor 1.3 GHz and comes with 512 MB RAM. These phones Pack the 4 GB of internal storage that can be expanded up to 32 GB via microSD card. As far as concerns the camera, Huawei Ascend Y320 has 2 megapixel main camera on the back

Huawei Ascend Android run Y320 4.2 and powered by a detachable battery 1350mAh. This measure 123.30 x 63.20 x 11.10 (height x width x thickness) and weighs 123.00 grams.

Huawei Ascend smartphone Y320 is dual SIM (GSM and GSM) that receive Regular and Regular. Connectivity options include Wi-Fi, GPS, Bluetooth, FM and 3 g. The sensor on the phone including the Proximity sensor and Accelerometer.



Huawei Y320-U30 Firmware Download

This is the official page, from which you can download Huawei Y320-U30 Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.


Huawei_Ascend_Y320-U30_V100R001C328B955_Android_4.2 Official
Type: ROM Size:
Download


Y320-U30V100R001C328B955 Read CM2 Fix Baseband
Type: ROM Size:
Download



Readme:

  • Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
  • Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online.

How to Flash Huawei Y320-U30

  1. Download all the necessary files above, and save it on your computer. This method uses the tools of flash so make sure the USB drivers been installed successfully «VCOM before proceeding to the next step.
  2. Remove Your FIRMWARE
  3. Go to the folder flash_tool and run flash_tool .exe if you run windows 7 or above, run the program using the privileged administrator to avoid errors when flashing consent.
  4. On the flash tool, please check out DA DL All the Checksum option, this is the first option that needs to be changed, and don't forget to check this option. Click on the buttons Scatter-Loading and navigate to target_bin and select the MT6xxx_Android_scatter_emmc. txt, this action will automatically load all the image files into the flash tool. I use MT6795 (64 bit) for example: download
  5. When everything is set up, turn off your device then disconnect the usb cable and the battery.
  6. Now you can click the Download button, or press F9.
  7. Re-insert the battery and reconnect the usb cable to the computer. The Flash tool will initialize the ROM file and after a few minutes of being prepared and ready to make a connection with your device. (When you got the error tool flash 8038 when connecting your device, then please click the button PROSESfirmware ↦ upgrade key) Note: for some devices that use batteries which can not be removed then you should wait until your device is really dead, if you believe it's already really turn off connect your device to your computer using the USB cable.
  8. The Flash tool will recognize your device and start to begin the process of flashing, the process will take time 5-6 seconds, it will show the progress bar at the bottom of the flash tool. When finished it will display a GREEN CIRCLE in the middle of the tool a good flash.
  9. Completed, you can now disconnect your device. Turn on your device, the first boot will take 3-4 minutes to complete so please be patient. While on the home screen, open the Caller and call ### # 682 # this will display option State, select Your country code and press submit. The device will reboot into recovery mode to apply the country code.
  10. When doing a boot and on the home screen, go to the Dialer and press ### # 8888 #, this will do a factory reset on your device. (will erase all data on the device, built in storage)
  11. Done, simply boot to your home screen and confirm the firmware Build Number and make sure the same with downloaded ROM.

Subscribe to receive free email updates: