Huawei Honor 4x CHE1-L04 Firmware Download
Huawei Honor 4x CHE1-L04 Firmware Download - Huawei Honor 4 x smartphone launched in October 2014. This phone comes with a 5.50-inch touchscreen display with a resolution of 720 pixels 1280 pixels on a PPI 267 pixels per inch. The price of Huawei India starts at 4 x the Honorarium of Rs. 7.999.
Huawei Honor 4 x powered by quad-core processor 1.2 GHz and comes with 2 GB of RAM. The phone's 8 GB of internal storage package that can be expanded up to 32 GB via microSD card. As far as concerns the camera, Huawei's main camera has 4 x the Honor 13 megapixel camera on the back and front of the 5 megapixel shooter for the narcissist.
Huawei Honor 4 x run Android 4.4.4 and supported by the non-removable battery 3000mAh. This measure 151.90 x 8.70 x 77.30 (height x width x thickness) and weighs 170.00 grams. Huawei Honor 4x CHE1-L04 Firmware Download
Huawei Honor 4 x is dual SIM smartphone (GSM and GSM) who receive Micro-SIM and Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM RADIO, 3 g and 4 g (with support for 40 Bands used by some LTE networks in India). The sensor on the phone includes Compass/Magnetometer, Accelerometer, proximity Sensor and Ambient light sensor.
Huawei Honor 4x CHE1-L04 Firmware Download
This is the official page, from which you can download Huawei Honor 4x CHE1-L04 Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.If your device has an error during the flash and stuck on fastboot you should use this firmware, but failure when flashing using this firmware can result in Brick or total shutdown.
Huawei_Honor_Cherry-L04_V100R001C900B150_India_Channel-Others_Android 4.4.4 KitKat_EMUI 3.0_05021SLQ.zip
Type: ROM Size: 1GB
SoC: Msm8916
Download
QFIL Firmware Huawei Honor 4x CHE1-L04
This Firmware is used if the device is dead after flashing, How to flash it you can use QFIL, Miflash or other Qualcomm Tool in edl mode (emergency download) qdloader Qualcomm hs-usb 9008.
Che1-L04C900B370_QFIL.tar.gz
Type: ROM Size: 1.1GB
SoC: Msm8916
Download
Readme:
- Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
- Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online
How to Flash Huawei Honor 4x CHE1-L04
- Install the usb driver and Qfil tools.
- Turn off your cell phone.
- Now connect your phone to the PC using the usb cable while holding the Volume button Up.
- Next run the "QFIL ".
- After the QFIL is open make sure your mobile phone is detected the PC with out writing "Qualcomm HS USB-9008 QDLoader " in tools QFIL, if there is already such writings now click Browse and find the file "prog_emmc_firehose_8916 mbn. " that is in the folder extract results the firmware, then click Open.
- Now click "Load XML " and will appear " rawprogram_unsparse " click Open in the file then it will show up again the file "patch0. xml " click open again.
- Now click "Download " on QFIL and the process of flashing will wait until it is finished running.
- If the flashing process is completed, the mobile phone will boot automatically
"Thanks a lot for visiting on our Blog. Let me know if the link is broken or Huawei Huawei Honor 4x CHE1-L04 Firmware Download is not working very well"