Huawei Honor 3C H30-U10 Firmware Download


Huawei Honor 3C H30-U10 Firmware Download - Smartphone Huawei Honor 3 c launched in may 2014. This phone comes with touchscreen display size 5.00 inches with a resolution of 720 pixels to 1280 pixels on a PPI 294 pixels per inch.

Huawei Honor 3 c powered by quad-core processor 1.3 GHz and comes with 2 GB of RAM. The phone's 8 GB of internal storage package that can be expanded up to 32 GB via microSD card. As far as concerns the camera, Huawei's main camera has 3 c Honor 8 megapixel camera at the back and 5 megapixel front for selfie.

Huawei Android running 3 c 4.2 Honoraria and supported by the non-removable battery 2300mAh. This size 139.50 x 9.20 x 71.40 (height x width x thickness) and weighs 140.00 grams.

Huawei Honor 3 c is a dual SIM smartphone (GSM and GSM) that receive Regular and Regular. Connectivity options include Wi-Fi, GPS, Bluetooth, FM and 3 g. The sensor on the phone includes Compass/Magnetometer, Accelerometer, proximity Sensor and Ambient light sensor.



Huawei Honor 3C H30-U10 Firmware Download

This is the official page, from which you can download Huawei Honor 3C H30-U10 Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.


H30-U10_V100R001C900B108_SIGNED.7z
type: ROM size: 697MB
md5: 72b3ba3ccbd134a2e9b44afef6dfcf40
Download


Readme:

  • Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
  • Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online.

How to Flash Huawei Honor 3C H30-U10

  1. Download Firmware Huawei 3 c H30-U10, then extract On Your PC/Computer
  2. Next, Install The USB Drivers
  3. Then open it And run the Flashtool, Scatter Load in the Tab On Click and enter the Firmware Flashtool Huawei 3 c which is located in the Folder Extract Results how to Flash Huawei Honor 3 c H30-U10
  4. Next Click On Download Flashtool, Make Sure All Of The Checkboxes Selected, Except Preloader Should unticked, Unless You Have A Backup Of The Original Firmware From Your Mobile Phone
  5. Then prepare a Huawei 3 c in conditions OFF
  6. Next, in the Off Condition Connect Huawei 3 c to your PC/computer Using a USB cable, make sure the drivers are already installed on your computer to Huawei 3 c was detected By Flashtool
  7. Flashing/Reinstall Huawei 3 c is in progress, wait Until the process of Reinstalling/Flashing Huawei 3 c Completed
  8. When It Is Finished It Will Pop Up A Notification Download OK On Green Box Flashtool
  9. How to Flashing Huawei Honor 3 c H30-U10
  10. Unplug your Huawei 3 c drive, and then try to turn on, Boot To the beginning Usually somewhat longer due to New Flash/Reinstall So reasonable, just wait Until the boot process completes.
"Thanks a lot for visiting on our Blog. Let me know if the link is broken or Huawei Honor 3C H30-U10 Firmware Download is not working very well"

Subscribe to receive free email updates: