Skip to content Skip to sidebar Skip to footer

Download Global Stable ROM for Xiaomi Redmi 4 Prime (Markw)

Xiaomi Redmi 4 Prime Smartphone launched in July 2017, comes with a touchscreen Full HD IPS LCD Capacitive 5 inches with a resolution of 1920 x 1080 pixels on the density of pixels, 441 pixels per inch. The screen is not protected by a Scratch Resistant screen.

This phone is powered by a 3.2 GHz processor Qualcomm Snapdragon Octa 625 and comes with 3 GB of RAM. What does this processor have core Octa on CPU and RAM 3 GB make sure the cell phone running smoothly with multiple applications open at once. The 4th Prime Redmi Xiaomi also packed in the graphics processor, and 32 GB of internal storage that can be expanded up to 256 GB via a microSD card.

The 4th Prime Redmi Xiaomi running Android OS 6.0 and powered by battery 4100 mAh. Its a Dual SIM Smartphone, and connectivity options at Xiaomi Redmi 4 Prime covers, GPS, Bluetooth, Wifi, HotSpot.

The most camera with Xiaomi Redmi 4 Prime is that the shooter 13 MP along with Auto Focus, Face Detection, HDR, Panorama Mode, Geo-tagging, Touch Focus, Digital Zoom, Video clip Recording. This particular Smartphone also offers a Front Facing Camera and that is proficient at photographing self-self 5 MP.

Download Global Stable ROM for Xiaomi Redmi 4 Prime (Markw)

Download Global Stable ROM for Xiaomi Redmi 4 Prime (Markw) on this page. After downloading the firmware, follow the instruction manual to flash the firmware on your device.

  • Global Stable ROM for Xiaomi Redmi 4 Prime Download 

  • Extract (unzip) the firmware file
  • Download and Install MIUI Flashing Tools
  • Load the phone in Fastboot mode. Turn off the device, then
  • Press and hold Volume Down key + Power Key about 10 seconds.Release all key when Fastboot Mode appears.
  • Then connect the device to the Windows PC/laptop via a micro USB cable
  • Run MIUI Flashing Tools
  • Click Browse to find the ROM file folder path extracted.
  • Click Refresh to recognize the device.
  • Then click FLASH to flash the ROM file to the device.
  • Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.

Xiaomi Redmi 4 Prime Specifications

LAUNCHAnnounced2016, November
StatusAvailable. Released 2016, November
BODYDimensions141.3 x 69.6 x 8.9 mm (5.56 x 2.74 x 0.35 in)
Weight156 g (5.50 oz)
BuildFront glass, aluminum body
SIMHybrid Dual SIM
DISPLAYTypeIPS LCD capacitive touchscreen, 16M colors
Size5.0 inches, 68.9 cm2 (~70.1% screen-to-body ratio)
Resolution1080 x 1920 pixels, 16:9 ratio (~441 ppi density)
– MIUI 8
PLATFORMOSAndroid 6.0.1 (Marshmallow)
ChipsetQualcomm MSM8953 Snapdragon 625
CPUOcta-core 2.0 GHz Cortex-A53
GPUAdreno 506
MEMORYCard slotmicroSD, up to 256 GB (uses SIM 2 slot)
Internal32 GB, 3 GB RAM
CAMERAPrimary13 MP, f/2.2, phase detection autofocus, dual-LED dual-tone flash, check quality
FeaturesGeo-tagging, touch focus, face/smile detection, HDR, panorama
Video1080p@30fps, check quality
Secondary5 MP, f/2.2, 1080p
SOUNDAlert typesVibration; MP3, WAV ringtones
3.5mm jackYes
– Active noise cancellation with dedicated mic
COMMSWLANWi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi Direct, hotspot
Bluetooth4.2, A2DP, LE
Infrared portYes
RadioFM radio
USBmicroUSB 2.0, USB On-The-Go
FEATURESSensorsFingerprint (rear-mounted), accelerometer, gyro, proximity, compass
MessagingSMS(threaded view), MMS, Email, Push Mail, IM
– Fast battery charging
– DivX/Xvid/MP4/H.265 player
– MP3/WAV/eAAC+/FLAC player
– Photo/video editor
– Document viewer
BATTERYNon-removable Li-Po 4100 mAh battery
MISCColorsGold, Dark Gray, Silver
PriceAbout 160 EUR
TESTSCameraPhoto / Video
Battery lifeEndurance rating 91h
Disclaimer. We can not guarantee that the information on this page is 100% correct.

Post a Comment for "Download Global Stable ROM for Xiaomi Redmi 4 Prime (Markw)"